Polished Concrete Flooring in Sarasota or Epoxy Flooring?

Spread the love

When it comes to concrete flooring, homeowners have a couple options. You can either go with polished concrete flooring in Sarasota or concrete floor polishing Sarasota. Since the new housing fashion statement on 2019 is exposed concrete flooring, you need to make sure that you go with the finish that will be perfect for you. With both polished concrete flooring Sarasota and concrete floor polishing Sarasota there are pros and cons. Before you decide to have your floors changed from hardwood or carpet to concrete you need to know exactly what you are getting into.



When people hear of polished concrete flooring Sarasota they normally do not really know what it is. Basically it consist of a mechanical polishing process of the surface of an already existing concrete slab. This process uses engineered floor grinders that are fitted with industrial diamonds. The concrete slab is then polished during this process by using the finer grits of the diamond blade up until the concrete has reached the shine level that is desired. Here is a list of the different levels of shine.


Level 1- Matte, Flat:

The floor will seem to be hazy with minimal reflection.


Level 2- Low Sheen:

The floor will have a very low luster sheen along with a matte finish. You will start to see a little overhead reflection at around 100 feet in distance.


Level 3- Semi-Gloss:

This gives the floor a higher gloss in comparison to the level 2. When about 30- 50 feet away the floor will start to reflect the light.


Level 4- High Gloss:

The floor has the highest level of shine an almost looks like glass.


That is one way to get your concrete to look good, lets look at the other way known as concrete floor polishing Sarasota. This polishing process mainly consist of a grind and seal method that involves just that, grinding and sealing the concrete. This method has several different steps.


Step 1:

The concrete first has to be grinded with floor grinders in order to remove anything that could contaminate the surface.


Step 2:

The divots and cracks in the flooring are then patched.


Step 3:

The floor might be grinded again depending on the finish that is desired and the durability requirements of the concrete.


Step 4:

The concrete surface is cleaned properly.


Step 5:

At this point a stain color can be added to the project if desired. This option comes in a variety of different colors.


Step 6:

Finally, the floor is sealed using high-performance sealers.


Now that you know what the difference is between the 2 most popular concrete options, you can make the decision on which one is right for your home.

Joshua Bannon